Kompernass KH 3300, Руководство по эксплуатации и технике безопасности

Страница: 16 / 68

Environmental protection: Never use combinations of new and used batteries. Never dispose of used batteries in the household waste.
Take them to an appropriate collection centre.
SETTING UP AND CONNECTING THE EQUIPMENT
You must follow the instructions given when preparing to use the equipment for the first time and only then insert the plug into the socket.
0 1) Carefully take the Designer Audio Unit and the loudspeakers out of the packaging.
0 2) Choose a suitable position for your Designer Audio Unit. It should be
· horizontal
· dust-free and dry
· away from heaters and direct sunlight.
0 3) IMPORTANT: Remove all the transport restraints
0 4) Connect the two loudspeakers. The loudspeaker connections (28) are appropriately labelled (L=LEFT / R=RIGHT).
Tips for setting up the loudspeakers:
• If possible set up the loudspeakers at head height.
• Do not cover the loudspeakers with curtains or other objects.
• Set up the loudspeakers on the shelf so that the front trim is flush with the front edge of the shelf.
• You can place rubber pads under the loudspeakers to prevent them from booming.
0 5) Use cinch connectors (26) to connect an external device such as a turntable.
0 6) Now connect the mains plug to a 230 V socket.
0 7) Insert the batteries (not supplied) into the remote control (2x AAA micro):
· Open the cover on the back of the remote control
· Insert batteries. Note the correct polarities (see diagram on back of battery compartment)
· Close cover again
OPERATING FEATURES
0 1 ON / OFF switch
0 2 Tone selector
0 3 RANDOM button
0 4 Mute
0 5 Change display (MODE/REMAIN)
0 6 Timer button
3
2
15