CR 5 A2
■
74
│
GB
│
MT
Transferring recordings to a computer
Connect the mini-USB plug of the supplied USB cable to the
port on
the camera and the USB plug to a free USB port of a switched-on computer . The
computer now recognises the device as "mass storage", the camera connects to the
computer and then the content of the SD/SDHC memory card appears as a new
drive on the computer . Now carry out the required file operations .
resetting the device
If the device does not work as described in this manual or it does not respond to
your operation, use a pointed object, e .g . a paper clip, to carefully press the switch
behind the RESET opening in the housing to restart the device .
Changing the fuse
The car adapter contains a fuse . If the device does not function, it may be be-
cause the fuse is defective . Exchange the defective fuse for a replacement fuse of the
same type (see also chapter
Technical data
) .
♦
To do this, pull the car adapter out of the cigarette lighter socket .
♦
Open the car adapter by carefully unscrewing the ribbed screw insert (C)
anticlockwise (using pliers if necessary) and removing it .
♦
Now, take the plug tip (B) from the fuse (A), remove the fuse (A) and place it to
one side .
♦
Now place the new fuse into the car adapter , place the plug tip (B) onto the
slightly protruding end of the fuse and screw the previously removed screw insert
(C) back in .
NOTE
►
If the device still does not work or the fuse blows again immediately, the device
is defective . Please then contact the Service Hotline (see chapter
Service
) .
Содержание CR 5 A2
Страница 3: ...a e b C d...