Kompernass CR 5 A2, Инструкция по эксплуатации и правила безопасности

Страница: 73 / 108

CR 5 A2
GB
│
MT
│ 69 ■
Photo standby
With the menu closed, press the MODE button during video standby to switch to
photo standby . The device then displays the following overview on the screen :
A – displays the remaining number of photos that can still be taken depending on
resolution and available storage space
B – current photo resolution
C – symbol to indicate an inserted microSD card
D – battery charge level of the internal battery
E – date display (only when the "Time & date stamp" is activated)
F – time display (only when the "Time & date stamp" is activated)
G – symbol for self-timer (here 5 seconds: only visible if the function is activated)
H – symbol for exposure correction
I – display for photo standby
J – display for continuous advance function (only visible if feature is enabled)
Taking photos
Press the / ▲ button repeatedly as required to zoom into the subject . Hold down
the button for fast zoom . You can use the / ▼ button in the same way to zoom
out . Press the
/ button to take a photo .
If you now press the MENU button in photo standby, the following menu opens:
Using the ▲▼ buttons / you can move the selection bar to the desired entry
and then call up this menu item with the
/ button . To exit the activated menu
item without making a change, press the MODE button . Below right, the current
menu board as well as the total number of menu boards is shown . If the
lowest menu item on a menu board is selected which leads to a further menu board,
press the ▼ button to jump to the first entry on the following menu board . To close
the menu, press the MENU button .