10
IUK 5 A1
GB
NOTE
►
If possible, keep the original packaging of the device for the warranty period so that the device
can be packed properly for return shipment in the event of a warranty claim.
Set-up location requirements
For safe and trouble-free operation of the device, the set-up location must fulfi l the following requirements:
■
Set up the device on a fi rm, fl at and horizontal surface.
■
The surfaces of some items of furniture might contain components that can corrode and soften the
rubber pads of the device. If necessary, place a cover under the device’s pads.
■
Or install the device using the mounting materials
that are included in the delivery to fi x the
mounting arm
onto the wall as shown in the following diagram.
■
After you have attached the mounting arm
with the screws and wall plugs
, turn the hand
screw (A) into the thread
on the bottom of the camera base
.
■
If required, loosen the screw connection (B) to adjust the angle of the mounting arm
. Then
retighten the screw connection (B) so that the camera is held securely on the mounting arm
.
■
Operate the device only in dry locations, never in a hot environment or anywhere near fl ammable
materials.
■
Operate the device only in locations with adequate ventilation.
