29
IUK 5 A1
GB
User account settings
Here you can change the sign-in name of the administrator and assign a password (by default no
password is set). In addition, you can set up an account with name and password for another user,
who may view the camera images but who cannot control any functions. To log on with these new
data, you must restart the browser.
Maintenance
Click on "Maintenance" in the left navigation pane to open the "Maintenance" page.
If you click on "Reset to default settings" and click "OK" on the subsequent confirmation prompt, all
of your settings will be deleted irrecoverably and be reset to the factory settings.
To restart the surveillance camera, click on "Reboot device" and confirm the subsequent confirmation
prompt by clicking "OK". After this, the device will restart.
In the line "Update device firmware", click on "Browse" to locate the file with which you want to
update the surveillance camera’s firmware. Then click on "Update" to carry out the required update.
Never disconnect the device from the power supply during this time because otherwise, it might be
damaged irreparably.
In the line "Update web application", click on "Browse" to locate the file with which you want to
update the web interface installed on the surveillance camera. Then click on "Update" to carry out
the required update. Never disconnect the device from the power supply during this time because
otherwise, it might be damaged irreparably.
NOTE
►
You may be able to display the camera image and make configuration settings in other browsers.
However, it is possible that not all of the options described for Internet Explorer 11 will be available.
