Komfovent Verso Pro 2 Series, Руководство по установке

Страница: 39 / 44

39
UAB KOMFOVENT we reserve the right to make changes without prior notice
VERSO PRO2_2_20-02
During the first minute of starting the unit, the unit automation checks the settings, automation components and opens
air dampers. Later, a signal is sent to fans and a heat exchanger, and the unit starts operating at a selected ventilation mode.
To change the ventilation mode settings: select a desired mode and set a desired air volume or temperature with the
arrows.
To turn of the AHU and return to a home screen:
6.2. Starting the Unit With a Computer
If the unit was ordered without a control panel or it is not used, you can start it with your computer. In this case the unit
is controlled via a web browser. Connect your computer directly to the AHU or to the same computer network as described
in Chapter 4.3. Run the Internet browser on the computer and disable the use of all Proxy servers that may block the connec-
tion in the settings. In the web browser address bar, enter the IP address of the unit:
C5 Komfovent
192.168.0.50