Komfovent Verso Pro 2 Series, Руководство по установке

Страница: 36 / 44

36
UAB KOMFOVENT we reserve the right to make changes without prior notice
VERSO PRO2_2_20-02
EN
INTERNETAS
Prisijungimas vidiniame kompiuteriniame tinkle
Prisijungimas internetu
„ Komfovent “ program ė l ė
„ Komfovent “ program ė l ė
Connection to the local computer network
Connection via the Internet
„Komfovent“ app
„Komfovent“ app
INTERNET
Fig. 43. Examples for the AHU connection to the Internet or the local network
5. FILTERS
Air filters are intended for removing dust, bacteria and other fine particles from the supplied and extracted air. VERSO
PRO2 air handling units are fitted with bag filters, since they have a larger filtering surface than compact filters and will
require less frequent filter replacement. Filters are made of synthetic fabric and can have different filtration classes
1
, i.e.
intended for removing particles of different sizes. In general, supply air ducts are equipped with better filtering class filters
than extracted air ducts, since the cleaned outdoor air is supplied to the premises. Make sure to replace filters on time, as
contaminated filters increase pressure loss of the unit, reduce purification efficiency and increase power consumption.
The unit has an integrated filter contamination monitoring function. It continuously measures pressure difference up-
stream and downstream the filter to evaluate level of contamination. For this function to work properly, calibration of clean
filters must be performed once the unit and all filters are installed (see Chapter “Commissioning and Inspection of the Unit”).
Filter replacement intervals depend on the environment pollution conditions as well as time of year, for example, during
spring and summer filters may be contaminated with pollen, pubescence or insects, therefore change intervals are shorter.
Replace filters if they are visibly dirty even though it is not time yet and a filter change message is not displayed yet.
Filter type, dimensions, filtering class, number and exact location is specified in the technical data print-out for the spe-
cific unit.
1
Depending on the order.