Komatsu HD465-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 257 / 420

On the screen “G2210”, you can select the communication
ports (COM1, COM2), specify the place to save the down-
loaded data, specify the file to create, and select the unit
for the created data.
For details, see the instruction manual of the download
software.
5.
Check “Summary Data File” and “Cycle Data File” of “File”.
In HD465 and HD605, only “Summary Data File” and “Cy-
cle Data File” are handled.
Once a setting has been made, there is no need to set it again when performing the next download.
6.
Click “ENTER” to return to the screen “G2200”.
7.
On the screen “G2200”, click “BACK” to return to the
screen “G2000”.
8.
Click “Download” on the screen “G2000”.
9.
When the screen “G2100” is displayed, click “Start”.
Downloading starts.
When downloading is finished, close the screen.
REMARK
The screen “G2101 < Down load - File ID” is displayed, de-
pending on the software version.
In this case, input the file ID, and click “OK”, then down-
loading starts.
DISPLAY TOTAL PAYLOAD AND NUMBER OF CYCLES
You can display the accumulated payload and the total number of cycles which are integrated at each dumping.
You can reset those values as well.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-205