Komatsu HD325-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 244 / 464

k k
CAUTION
The following conditions must be met before starting the work to prevent the machine from moving dur-
ing adjustment.
• The machine is placed on a level ground.
• The dump body is seated.
• The engine is stopped.
Loosen mirror mounting bolt (1) and nut (2), then adjust the mirror to the position that assures the best view
from the operator's seat.
• Adjust the position and angle of each mirror so that it re-
flects a sight of 200 mm or more within the height of
1500 mm above the ground.
In the adjustment, make sure that a part of the machine al-
so comes into view.
• View range
Mirror (A)
Hatched area (A), the area around tire's ground contact
point (A'), ground (A''), and the top edge of the dump body
must be in view.
Mirror (B)
Hatched area (B) must be in view.
Mirror (C)
Hatched area (C) and a part of the machine body must be
in view.
Mirror (D)
Hatched area (D), the area around tire's ground contact
point (D'), ground (D''), and the top edge of the dump body
must be in view.
Mirror (E)
Hatched area (E) and a part of the machine body must be
in view.
Mirror (F)
Hatched area (F) and a part of the machine body must be in view.
Mirror (G)
The area around the ladder of the hatched area (G) must be in view.
Mirror (H)
The area around the ladder of the hatched area (H) must be in view.
Rearview monitor
Hatched area (J) must be in view.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-184