Komatsu HD325-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 233 / 464

7.
After adding, align claw (10) of the cap with groove (11) of
the filler port and close the cap securely by turning it clock-
wise by 90 °.
8.
Close the cover (2).
REMARK
• It is recommended to use a nozzle having a diameter and a length specified by ISO 22241-4 and an auto
stop function to add DEF. When the specified nozzle is used, the magnet installed inside the filler port of the
tank cancels the wrong fluid addition prevention device, and you can add DEF. This mechanism prevents
addition of DEF into the fuel tank, addition of fuel into DEF tank, and spill of DEF from the filler port.
• When using a nozzle which is not conformed to ISO 22241-4, hold it in your hand and add DEF carefully
while checking the sight gauge.
• Add only DEF in clearly marked DEF tanks that have the blue cap.
METHOD FOR CHECKING TIRE PRESSURE
Check the tire inflation pressure before starting work while the tires are cold.
1.
Measure the tire inflation pressure with an air pressure gauge.
2.
Adjust the tire inflation pressure properly.
The proper tire inflation pressure is shown below.
HD325–8
Tire size Tire inflation pressure kPa { kg/cm
2
}
18.00R33
★★
690 {7.0}
HD405–8
Tire size Tire inflation pressure kPa { kg/cm
2
}
21.00R33
★★
690 {7.0}
NOTICE
If the tires are used when the tire inflation pressure is less than the value given in the table above,
the rim may be damaged.
Make sure to keep the tire pressure within 0 to +30 kPa {0 to +0.3 kg/cm
2
} of the value in the table.
3.
Check the tires and the rims for wear or damage, and check the hub bolts for looseness.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-173