Komatsu Galeo HD325-6, Руководство по эксплуатации и техническому обслуживанию

Страница: 77 / 317

.
OPERATION
EXPLANATION OF COMPONENTS
POWER MODE SELECTOR SWITCH
The power mode switch (8) can be switched to allow the machine to travel economically in a way suited to the
operating conditions. If depressed once, it lights up; if depressed once again, the light goes off.
OFF position: High power (general operations)
This is used for general operating conditions.
ON position: economy (traveling in flat areas)
This position is used when the emphasis is on reducing fuel consumption, such as when traveling on
flat ground where maximum output is not needed.
(HD325, HD405)
(HD325 only the machine of 4WD specifications)
AISS LOW SWITCH
Using this switch (9), it is possible to switch the AISS freely
between AUTO and LOW. Use each position as follows.
If the switch is depressed, it lights up, and if it is depressed once
again, the light goes off.
OFF position (Light is off): AUTO position
At normal operation
ON position (Light is on): Low speed position
When the delicate start and operation is
needed like putting the machine into
garage
If the switch is at AUTO position:
1. When stopping the machine, by setting either parking brake or retarder brake at ON position, idling is set at low
speed. When starting, by setting the parking brake at OFF position, idling is set at high speed.
2. Detecting the water temperature, idle is set at high speed automatically under the low temperature condition,
and the warm-up time is shortened.
3 - 28