Komatsu Galeo HD325-6, Руководство по эксплуатации и техническому обслуживанию

Страница: 293 / 317

.
ATTACHMENTS, OPTIONS
OPERATION OF ABS AND ABS/ASR
PRECAUTIONS FOR USE
WARNING
If the ABS functions while traveling on a slippery road, the braking distance may be slightly lengthened. Even if the ABS is
turned on, the tires may lock when the machine is braked when running at a very low speed. Accordingly, take care when
driving on slippery roads.
If the machine is braked while running at high speed or on a slippery road, more air is consumed by the ABS/ASR. If the air
pressure drops and the warning buzzer sounds, stop the machine in a safe place. Wait until the air pressure is restored
sufficiently, then start again.
Even with the ABS/ASR system installed, there may be instances where the machine can not travel safely such as on a road
having an extremely low coefficient of friction (a frozen road, etc.) or on a steep slope. In this case, repair the road surface
before driving.
The machine can be travel normally even if the ABS/ASR main switch is turned off. In this case, however, watch
out for lateral skidding of the machine.
Even if the ABS/ASR system malfunctions, the machine can be travel normally. Watch out for lateral skidding in
this case, however, while traveling on slippery roads. If the warning lamp lights up, the system is automatically
turned off and the ABS/ASR system does not function.
Even if the ABS/ASR system is installed, the secondary brake function is maintained.
If the ABS/ASR main switch is turned on with the brake pedal depressed or the retarder control lever pulled,
exhaust sound will be momentarily emitted from the ABS valve. This does not indicate a fault.
If both rear wheels slip at the same speed, the ASR will not function. In this case, adjust the engine output with
the accelerator pedal.
When installing a wireless device on the machine, select one which does not violate the wireless device-related
laws/regulations and use it according to law. Mount it as far away from the devices and wiring harness of the
ABS/ASR system as possible.
TROUBLESHOOTING
When the starting switch is turned on, if the warning lamp does not light up, it may be broken. In this case, replace
the lamp.
If the ABS/ASR system malfunctions while being used, the warning lamp (Red) will light up. In this case, stop the
machine at a safe place immediately, then ask your Komatsu distributor to carry out repair.
The positions of each switch and the statuses of the corresponding warning lamps are as follows.
Starting switch
ABS/ASR
Main switch
Warning lamp
OFF OFF Goes off
OFF ON Goes off
ON OFF Lighted (Normal)
ON ON
Stays lighted until travel speed rises to about 10 km/h (6.2 MPH),
then goes off (Normal).
Lights up when a fault occurs (Malfunction).
6 - 30