Komatsu Galeo HD325-6, Руководство по эксплуатации и техническому обслуживанию

Страница: 119 / 317

.
OPERATION
OPERATION
CHECK INFLATION PRESSURE OF TIRES
Measure the inflation pressure with a tire pressure gauge, while the tires are cool, before starting work.
Check for damage or wear to the tires and the rims.
Check for loose wheel hub nuts (bolts).
The proper inflation pressure is shown below.
HD325
Tire size Inflation pressure
18.00-33-28PR (standard) 0.49 MPa (5.00 kg/cm
2
, 71.0 PSI)
18.00-33-32PR (if equipped) 0.56 MPa (5.75 kg/cm
2
, 81.7 PSI)
18.00R33

(if equipped)
0.69 MPa (7.00 kg/cm
2
, 99.4 PSI)
HD325 4WD specifications
Tire size Inflation pressure
18.00R33

(standard)
0.69 MPa (7.00 kg/cm
2
, 99.4 PSI)
18.00-33-32PR (if equipped) 0.56 MPa (5.75 kg/cm
2
, 81.7 PSI)
18.00-33-28PR (if equipped) 0.49 MPa (5.00 kg/cm
2
, 71.0 PSI)
HD405
Tire size Inflation pressure
18.00R33

0.69 MPa (7.00 kg/cm
2
, 99.4 PSI)
NOTICE
If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged.
Always keep the tire inflation pressure 0 to +0.03 MPa (0.3 kg/cm
2
, 4.3 PSI) of the value in the table above.
CHECK WATER SEPARATOR
The water separator separates water mixed in the fuel. If float (2)
is at or above red line (1), drain the water.
For the draining procedure, see section "DRAIN WATER FROM
WATER SEPARATOR (PAGE 4-39)".
Even if a water separator is installed, be sure to check the fuel tank
to remove water and sediment in the fuel.
3 - 70