Komatsu D51EXi-24, Руководство по эксплуатации и техническому обслуживанию

Страница: 83 / 194

Control box screen display
Main causes Remedy
Elevation control key
(Left bottom of the main win-
dow) Slope control key
(Right bottom of the main win-
dow)
No GPS localization (Green) - -
Control points file is not
yet set.
Select the project file in-
cluding control points
file. For details, see
“METHOD FOR IM-
PORTING AND SET-
TING PROJECT
FILES”.
Set control points file.
For details, see “METH-
OD FOR IMPORTING
CONTROL POINT
FILES”.
Low precisions... (Orange) - -
Positioning accuracy
gets worse than that of
setting in “Machine set-
up...”. For details, see
“SET FOR CONNECT-
ING TO MACHINE”.
Move the machine to a
place under the open
sky, or wait for a better
time for communication
of the GNSS satellite.
When the finishing ac-
curacy is not important,
you may continue the
work.
- - Heading Initializing (Orange)
Machine direction is not
known.
Move the machine
backward and forward.
Keep the joystick
(steering, directional
and gear shift lever) in
NEUTRAL position
while the machine is
stopped.
Out of design area... (Green) Out of design area... (Green)
Project file is not select-
ed.
Select the project file in-
cluding design surface.
For details, see “METH-
OD FOR IMPORTING
AND SETTING
PROJECT FILES”.
Design surface is not
selected.
Set the design data. For
details, see “METHOD
FOR SELECTING AN
ACTIVE SURFACE
FILE”.
Out of range of selected
design surface
Move the machine with-
in the selected range of
design surface.
- - 1.$% (Red) System error
Take actions according
to other messages dis-
played at the same
time.
OPERATION TROUBLES AND ACTIONS
3-69