manualshive.com logo in svg

Komatsu Utility Avance WB91R-2, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Komatsu Utility Avance WB91R-2 Скачать руководство пользователя страница 54

PRECAUTIONS FOR MAINTENANCE

52

2.8.18 COOLING FAN AND BELT 

2.8.19 WASTE MATERIALS 

2.8.20  PRECAUTIONS TO BE TAKEN WHEN 

INFLATING TYRES 

RWA01660

•

Be careful to the revolving parts and do not allow anyone to
get too close to these parts, since clothes or parts of the body
may get caught into them.

•

If hands, clothes, or tools touch the fan blades or the belt, they
may be cut, torn or seriously damaged; for this reason, avoid
touching the revolving parts.

RWA01670

•

Do not dispose of used oil in the sewer system, rivers, etc.

•

Always put used oil in containers. Never drain the oil directly
onto the ground.

•

Keep to the laws and regulations in force when disposing of
harmful substances such as oil, fuel, solvents, used filters and
batteries.

RWA01680

•

When being inflated, the tyres may explode and come off, thus
causing serious accidents.

•

Before inflating the tyres, always check the conditions of the
rims and the outer conditions of the tyres themselves, in order
make sure that there are no dents, cuts, torn plies or other de-
fects.

•

It is advisable to have these checks and maintenance opera-
tions carried out by a specialized technician.

•

Inflate the tyres using a protection structure and a pneumatic
inflating gun with extension complete with controlling pressure
gauge.

•

Before starting this operation, make sure that there is no one
in the vicinity and position yourself in front of the tread.

•

Do not exceed the inflation pressures prescribed for the single
types of tyre and make sure that all the tyres have the same
pressure.

Содержание Avance WB91R-2

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды