Komatsu Utility Avance WB91R-2, Руководство по эксплуатации и техническому обслуживанию

Страница: 144 / 280

142
USING THE MACHINE AS A LOADER
3.12.2.2 LOADING OPERATIONS ON SLOPES
3.12.3 CHANGING THE STANDARD FRONT
BUCKET
DANGER
•
Travel uphill with the bucket directed forward; the same rule must be followed when loading.
•
Travel downhill in reverse with the loader directed forward and lowered bucket.
•
Move changing direction very slowly, with the bucket as low as possible.
•
Avoid any transverse position with respect to the slope directrix.
•
Sudden movements of the bucket and dangerous positions may cause the machine to overturn and
lead to serious accidents and even death.
DANGER
•
When the coupling pins are removed or installed, chips
may come off; always use gloves, goggles and helmet.
•
The change of the equipment must be carried out by two
persons, who must decide together the words and signals
to use during operations.
•
Do not use your fingers to center the holes, since the may
be injured or even cut.
•
The described procedures are valid also for the coupling
of the mechanical constraints of the optional equipment.
1 - Position the bucket on level ground.
2 - Remove the check bolts (1) and the coupling pins (2).
3 - Change the bucket (3), taking care to clean the pins and
bushings perfectly and to grease the pins slightly before rein-
stalling them.
4 - Put back the check bolts and tighten them.
5 - Lubricate the pins (see “4.5.1 LUBRICATION DIAGRAM”).
1
2
RWA03660
3