Komatsu Utility 69001, Руководство по эксплуатации и техническому обслуживанию

Страница: 266 / 276

DELUXE SEAT
ATTACHMENTS, OPTIONS
6-12
DELUXE SEAT 6
(Rotating seat)
ADJUSTMENT 6
WARNING
When adjusting the position of the operator's seat, always set the work equipment lock lever to the LOCK
position to prevent any accidental contact with the control levers.
q
Always adjust the operator's seat before starting each operation or when the operators change shift.
q
When adjusting the seat, put your back against the backrest and adjust to a position where the brake pedal
can be fully depressed.
(A) Fore-and-aft adjustment
Pull lever (1), set the seat to a position where it is easy to oper-
ate, then release the lever.
Fore-aft adjustment: 200 mm (10 stages)
(B) Weight and height adjustment of seat
q
Turn knob (2) under the seat so that weight adjustment
indicator (3) displays the green range. The height can be
adjusted by turning the knob (2) while the green range is
displayed.
q
Turn the knob clockwise to raise the seat and turn the knob
counterclockwise to lower the seat.
Height adjustment range: stepless, 75 mm
Weight adjustment range: 50 to 130 kg
(C) Adjust reclining angle
REMARK
When the seat is pushed forward, the available reclining angle
becomes greater; when the seat is pushed back, the available
reclining angle becomes smaller. When moving the backrest,
return the backrest to its original position before moving the
seat.
Pull up lever (4), set the seatback to a position where it is easy
to operate, then release the lever.