Komatsu Utility 69001, Руководство по эксплуатации и техническому обслуживанию

Страница: 82 / 276

EXPLANATION OF COMPONENTS
OPERATION
3-28
8. When the buzzer cancel switch is operated to
U
, the
brightness of the display panel B (multi-information) back-
lighting is set.
REMARK
To return to the maintenance mode, operate the buzzer cancel switch to
t
.
The brightness of the backlighting of the monitor panel differs according to whether the front lamp is lit or not.
Entering this mode when the front lamps are lit makes it possible to adjust the brightness when the front lamps are
lit. In the same way, entering this mode when the front lamps are not lit makes it possible to adjust the brightness
when the front lamps are not lit.
9. Adjusting contrast of liquid crystal display panel B (multi-information)
10. The diagram on the right is the mode for adjusting the con-
trast of the liquid crystal display panel B (multi-information).
On this screen, operate the buzzer cancel switch to
U
to
switch to the screen to adjust the contrast.
11. The contrast can be adjusted by operating the information
switch.
The higher the number, the deeper the screen becomes;
the lower the number, the lighter the screen becomes.
> position: Number increases
< position: Number decreases
12. When the buzzer cancel switch is operated to
U
, the con-
trast of the liquid crystal display panel B (multi-information)
is set.
REMARK
To return to the maintenance mode, operate the buzzer cancel switch to
t
.