Kolver 033001, Руководство оператора

Страница: 16 / 89

Vers. 111422 16
TorqueMaxUnderMinLim
In angle control: the maximum torque set in the program is
equal or lower than the minimum limit of the screwdriver.
In torque control: The maximum torque set in the program
is equal or lower than the target torque already set.
TorqueMinOverMaxLim
In angle control: the minimum torque set in the program is
equal or higher than the maximum torque already set.
In torque control: the minimum torque set in the program
is equal or higher than the target torque already set.
RevTorqueOverMax
The reverse torque of this program is higher than the
maximum torque of the screwdriver.
RevSpeedOverMax
The reverse speed is higher than the maximum allowed by
the screwdriver.
RevSpeedUnderMin
The reverse speed is lower than the minimum allowed by
the screwdriver.
RunningTorqueOverMax
In running torque – compensate mode, the sum of the max
running torque and the target torque is higher than the
maximum torque of the screwdriver.
In running torque – monitor mode, the max running torque
is higher than the maximum torque of the screwdriver.
If the connection with the screwdriver is successful, the main screen will be displayed, and
the screwdriver will be ready for work.
Connect a thumb drive on the USB-A port (the larger USB port) to automatically save each
screwdriving result.