Kollmorgen MMC Smart Drive Series, Руководство по оборудованию

Страница: 355 / 386

Kollmorgen - June 2014 353
MMC Smart Drive Hardware Manual
-
DRIVE RESIDENT DIGITAL MMC CONTROL
13.5.5 General I/O Port (C5)
The 26-pin HD male D-sub General I/O Port connector (labeled “C5” on the front of
the Control) provides connection between user I/O devices and the Control. This port
provides 8 source-only, 250ma, short-circuit protected outputs (described in detail in
section 13.5.5.1 on page 358 ), and 8 source-only inputs (described in detail in section
13.5.5.2 on page 360 ).
• Pin descriptions are provided in Table 13-17
• Pin assignments are provided in Table 13-18
• The available Flying Lead cable is described in Table 13-19.
• Available Breakout Boxes and Cables are described in Table 13-20 .
• Breakout Box dimensions are shown in Figure 13-5
Table 13-16: Ethernet Port to Ethernet Device Cables
Part Numbers:
.3 M (1.0 ft): M.1302.8285 .6 M (2.0 ft): M.1302.8286
1 M (3.3 ft): M.1302.8287 2 M (6.6 ft): M.1302.8288
3 M (9.8 ft): M.1302.8289 5 M (16.4 ft): M.1302.8300
10 M (32.8 ft): M.1302.8301 15 M (49.2 ft): M.1302.8302
30 M (98.4 ft): M.1302.8303
Cable type: 28 AWG, shielded, twisted pair, 8 conductor.
8-Pin RJ-45 Plug (to
Ethernet Port, face view)
8-Pin RJ-45 Plug (to
Ethernet Device, face view)
Pin Signal Pin Signal Notes
1 Transmit Data + 1 Receive Data + Twisted
2 Transmit Data - 2 Receive Data - Pair
3 Receive Data + 3 Transmit Data + Twisted
6 Receive Data - 6 Transmit Data - Pair
4 None 4 None Twisted
5 None 5 None Pair
7 None 7 None Twisted
8 None 8 None Pair
Shell Drain Shell Drain
1
8
1
8