Kollmorgen AKMH2, Инструкция по эксплуатации

Страница: 39 / 75

11.4.1 Frame size, flange and shaft options
Dimension drawings can be found from page .
Framesize Flange
type
Flange
diameter
∅
Pilot
diameter
∅
Shaft
diameter
∅
Accuracy
pilot
1)
Accuracy
shaft
2)
Tolerance
class pilot
3)
2 A, C 79 mm 40 mm 11 mm j6 k6 N
3 A, C 89 mm 60 mm 14 mm j6 k6 N
4 A, C 114 mm 80 mm 19 mm j6 k6 N
5 A, C 148 mm 110 mm 24 mm j6 k6 N
6 A, C 186 mm 130 mm 32 mm j6 k6 N
1) acc. to EN 60034-7……2) acc. to EN 42955……3) acc. to EN 50347
Flange mounting (flange types Ax, Bx):
The basic style for flange mounting is style IM B5 according to EN 60034-7.
Mount the FDA approved o-ring for flange sealing.
Face mounting (flange types Cx, Dx):
The basic style for face mounting is style IM B14 according to EN 60034-7.
Mount the FDA approved o-ring for flange sealing.
Shaft
Power transmission is made through the cylindrical shaft end (with a shaft center thread).
Code Description Description
C Closed key way Key way according to DIN 748.
Key according to DIN 6885 T1 form A.
Key material: stainless steel 1.4404
Shaft center locking thread
Shaft material: stainless steel 1.4404
N Smooth shaft Shaft center locking thread
Shaft material: stainless steel 1.4404
AKMH Installation | Table of Contents
Kollmorgen | March 2014 39