13
EMPTYING THE FILTER
WARNING!
Using the pool vacuum without a filter cage in place will VOID
your warranty.
In order to maximize the cleaning efficiency, be sure to clean the filter cage before
and after each use.
CAUTION! If the pool vacuum is charging, disconnect the external adaptor from the
power source and detach the pool vacuum from the charger base.
Emptying the filter cage
1. Place the pool vacuum on a stable surface.
2. Press the locking button until the locking hole on the clear canister is released.
Slide the canister away until the notch on the bottom of canister opening is released
from the hook on the bottom of main body. Remove the filter cage from the main
body.
CAUTION!
Replace the damaged filter cage immediately before the next operation.
3. Clean out the debris and rinse the filter cage with water. If brushing is deemed
necessary, use only a soft brush to clean the cage gently and carefully.
4. Re-position the filter cage inside the main body. Make sure the filter cage is
completely inserted inside the main body.
To re-install the canister, first align the notch of the canister with the hook on main
body and then press the canister onto main body. Make sure the locking hole on the
clear canister is secured with the locking button.
MAINTENANCE & STORAGE
NOTE:
1. Battery discharges on its own during storage. Make sure to fully-charge the pool
vacuum before storage.
2. You must re-charge the battery at least once every three months when it is not in
use.
