KOKEN LM-095N, Инструкция по эксплуатации

Страница: 44 / 56

42
A dotted line is displayed.
Register the measurement
starting point.
Move your
finger .
Select the sensor used. The text on the button
changes to "Entry".
A dotted line is displayed.
Register the measurement
starting point.
Move your
finger .
Select the sensor used.
The text on the button
changes to "Entry".
A dotted line is displayed.
Register the measurement
starting point.
Move your
finger .
Select the sensor used.
The text on the button
changes to "Entry".
Clicking on the [Measurement] button (or pressing the M key on the keyboard) registers the
positions of the two fingers at that point in time as the measurement points. The registered
measurement points are displayed in a different color from the temporary measurement points,
and a solid line is displayed between the measurement points. The distance between the two
points is displayed in centimeter units, to one decimal place.
(b) Single-finger movement distance
This measurements the distance moved by either of the two fingers to which the sensors are
attached. The starting and ending points are registered as the measurement points.
When “Single-finger movement distance” is selected as the measurement mode, the text on the
[Measurement] button in the "Measurement" dialog box reads "Entry". Buttons are displayed for
selecting the finger to be used for measurement.
Move the finger with the sensor selected for use to the starting point of the location that you want
to measurement. Clicking on the [Entry] button (or pressing the M key on the keyboard) registers
the measurement point. At this point, the text on the [Entry] button changes to [Measurement].
Next, move your finger to register the ending point. A dotted line is displayed between the starting
point and your finger.