KOKEN LM-095N, Инструкция по эксплуатации

Страница: 3 / 56

1
Handling and Safety Precautions
These precautions should be strictly observed in order to ensure safe, long-term
use of the product.
The following precautions should be observed particularly strictly:
1. This model is made of a special material with a feel similar to that of the human body. Please
handle it with the same care that you would exercise when working with a human body. Pulling
it with excessive force or su bjecting it to a strong impact, for example if dropped, could cause
damage to the model.
2. The material of the vulva for vaginal exam II has a distinct odor. This odor is not harmful to the
human body and does not indicate poor quality. The distinct odor fades with time. There may
also be a smell of baby powder remaining on the product, as baby powder is applied during
fabrication.
3. Use glycerin to lubricate. Be sure to apply a sufficient amount of lubricant (glycerin) to the model
before practicing. Koken is not responsible for deterioration or damage to the model occurring
from use of lubricants other than glycerin. When the glycerin provided runs out, use commercially
available glycerin.
4. Placing objects directly on top of the model or placing the model on uneven surfaces may cause
deformation.
5. Do not use rubbing alcohol, thinners, or benzin or other organic solvents on the model, as doing
so may cause damage.
6. Do not use oil-based inks, pencil, chalk, or paints on the model, as they will soak into the model
and cannot be removed.
7. If the surface becomes increasingly sticky or after washing the model with water after practicing,
apply baby powder all over the vulva for vaginal exam II to reduce friction
8. The vulva for vaginal exam II may become deformed due to aging. Check the shape of the model
about 3 years after purchase. If it is deformed to the extent that function is affected, consider
replacing the vulva for vaginal exam II.
9. Air bubbles or impressions in the vulva for vaginal exam II that may remain from during
fabrication do not affect the strength of the material, as the material used is tear-resistant.