Fig.#36
Bracket
Lag bolt
Bolt
Kohler Co. Jan 2018 17 1345889-A02-A
2. Unscrew two lag bolts as shown
Fig.#35
Cover board
Snap in position
Supporting
board
Control panel signal wire
Motor assembly signal wire
1. Dismantle the control panel, as shown.
Hold control panel bottom with both hands and push upward to open the panel. Ope from the bottom up.
Dismantle motor assembly signal wire and control panel signal wire.
Dismantle and service discharge valve
Flush FULL button
Flush ECO button
Fig.#34
5. Once connected to the power and water supply, the toilet is ready for use.
