-8-
2. Tighten the long screw into the holes of the tank bracket
and cover the drainage hole with the big cap, cover the
inlet hole with the small cap.
2.
Inlet Hole
Drainage Hole
Big Cap
Tank Bracket
Small Cap
Long Screw
3. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
3.
1.
2.
Water Pipe
Connecting Pipe
1) K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
Access Panel Installation Methods:
There are four ways to install access panel:
Method one: Press from top
Method two: Remote plate installation: fix four plates
with screws
Method three: Remote installation of mask
Method four: Press from front: fix four plates with screws
1)
:
K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
Method three:
Remote installation of mask
Method four:
Press from front
Method one:
Press from top
Method two:
Remote plate installation
4. According to different faceplates,there are different
installations of access panel as below.
4.
20~72
Air hose
Pinch
plate
Suggested faceplate
installation area
R1000mm
Air hose
Suggested faceplate
installation area
R1000mm
Air hose
Pinch plate
Finished
wall
Suggested/
80
3
1402749-T01-A
