Kohler Sterling 995, Руководство по установке и эксплуатации

Страница: 4 / 28

2. Sink Preparation
CAUTION: Risk of product damage. Use a sharp hole saw. A
dull hole saw can damage the sink.
Small drill point locators on the underside of the faucet deck
indicate the center of each potential faucet opening. Determine
which holes you will need for your particular faucet installation.
Carefully place the sink upside down over the cutout making
sure the countertop is supporting the sink and turn the sink so
that the drill point locators are over the cutout.
Drill pilot holes through the faucet deck at the desired faucet hole
locations.
Position the sink in the cutout with the faucet deck toward you.
Using a 1-1/2
″
diameter hole saw and the pilot holes as guides,
cut the faucet holes in the faucet deck.
Smooth the faucet holes with a file to remove any rough edges
and excess sink material.
Repeat the procedure for each desired faucet opening.
Remove the sink from the cutout.
Hole Saw
Pilot Hole
Drill Point
Drill pilot hole.
1064719-2-B 4 Sterling