Kohler Sterling 995, Руководство по установке и эксплуатации

Страница: 3 / 28

1. Prepare the Countertop
For existing installations, carefully lift the old sink out of the
countertop. Compare the existing cutout to the required cutout
size. If needed, enlarge the cutout hole according to the directions
for new installations.
NOTE: The front edge of the sink should be at least 1/2
″
(1.3 cm)
from the countertop edge.
For new installations, carefully place the sink upside down on the
countertop in the desired position. Be careful not to damage the
sink finish. Verify the sink will not interfere with the cabinet.
Trace the sink outline onto the countertop. Do not cut along this
line.
Draw a line 3/8
″
(1 cm) inside the sink outline.
Drill a pilot hole inside the cutting line. Using a jigsaw or keyhole
saw,
cut along the inside line to cut out the opening in the
countertop.
Sink
Sink
Outline
Countertop
Pilot Hole
3/8" (1 cm)
Sterling 3 1064719-2-B