6
Thermostatic shut-down
thermostat will shut off hot Supply
Within 2 seconds
if cold Supply Fails.
(achieved only if the hot supply temperature is greater than 0°c above the set
blend temperature).
Flow Rates
Typical Flow Rates (Valve Only)
Connections
Standard connections are:
Hot-Left, Cold-Right, Bottom-outlet
. If reversed inlets
are required refer to section:
‘Reversed Inlet supplies’
.
Inlets: 5 mm compression.
outlet: ½” BSP.
low Pressure - No Flow regulator Fitted
high Pressure - l/min Flow regulator Fitted
5
0
5
0
5
30
35
0
0
Pressure Loss (bar)
Flow Rate (L/Min)
.0
.0
3.0
4.0
5.0
