Kohler Mira Zest, Руководство пользователя

Страница: 24 / 29

23
1. Remove the three screws that hold the
cover, remove the cover.
Note! The rubber ball is ejected to
reduce the damage if the outlet is
blocked or the appliance is frozen.
2. Remove the five screws that hold the
switch assembly, heater tank and, flow
regulator assembly.
3. Lift out the switch assembly, heater
tank and flow regulator assembly.
4. Using your finger push the ball back
into the tank. Do not remove the 'O'
seal.
5. Refit the components in reverse order.
6. Replace the cover. If the cover does
not fit easily, rotate the knobs slightly
so that they fit into the spindles. Do
not force the cover.
Ball
Flow Regulator
Assembly
Switch
Assembly
Relief Valve Assembly - Resetting
WARNING! Isolate the electrical and water supplies before removing the cover. Mains
electricity connections are exposed when the cover is removed.
Screws
Heater
Tank
Ball