Kohler Mira Zest, Руководство пользователя

Страница: 18 / 29

17
Operation Instructions
To turn the shower on
1.
Switch on the electrical supply at the
double pole switch.
2. Turn the power knob to High . Wait
15-20 seconds for warm water to reach
the handset.
For electrical economy, set the power
knob to
Medium . This setting will
provide sufficient power when the
supply water temperature is warmer,
such as in the summer.
For an unheated shower, set the power
knob to
Low .
To set the shower temperature
1.
Set the shower temperature by rotating
the temperature knob as necessary.
Turn the knob clockwise for hotter
water and anticlockwise for cooler
water. Wait 10–15 seconds for the
adjusted temperature to reach the
handset.
Note! It is normal for the flow rate to
change when the temperature is
changed.
Note! If the water temperature cycles
between hot and cold, the temperature
is set too high. This is causing the
thermal switch to turn off the heating
element to reduce the water
temperature. Turn the temperature
knob anticlockwise to reduce the water
temperature.
To turn the shower off
1.
Turn the power knob to Stop .
Note! A small amount of water may
continue to flow from the handset for
a few moments.
2. Switch off the electrical supply at the
double pole switch.