Kohler mira GO, Инструкция по установке и эксплуатации

Страница: 15 / 32

15
1486928-W2-A
Remove the three screws that hold the cover on and remove the cover.
Determine the direction and route of
the incoming water supply as shown.
Note: DO NOT use an incoming supply
entering the shower directly from the
back. Add an elbow to the supply pipe
and connect it as a rising or falling
supply.
1 Min
DO NOT flush through the product by
removing the inlet filter. Debris may
damage the product and invalidate the
guarantee.
Flush for approximately 1 minute through
pipework prior to connection.
1
2 3
Cover
Screw
Screws
Falling
(entering the shower
from the top).
Rising
(entering the shower
from the bottom).