the external flush valve assembly (orange) and O-ring rise
as the water flows to the bowl and rim.
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
= Water
External
Flush Valve
Fig. #8
Refer to Fig. #9.
When the water level drops below the
level of the outer flush valve assembly it reseals. This then
causes the inner tube and unseated O-ring to lower and
reseal.
É
É
É
É
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
= Water
Fig. #9
SERVICING THE FLEUR FLUSH VALVE
REMOVING OLD FLUSH VALVE
1. Shut off water supply to toilet. Flush toilet.
2.
Refer to Fig. #10.
Remove tank from bowl: remove
brass nut and washer below the tank, then pull out rub
ber washers, brass washers, and brass screws from in
side the tank. Set aside.
3. Remove nut below bottom of tank. Remove flush valve
and gasket.
INSTALLING NEW FLUSH VALVE
1. Insert new valve into tank. Make sure gasket is INSIDE
the tank.
2. Tighten nut back onto bottom of tank by hand. Turn ad
ditional 1/4 turn with a wrench.
