Kohler K-2593-VBW-0, Руководство по установке

Страница: 12 / 68

7. Install the Bath
Apply sealant to both sides of the gaskets on the drain and overflow assembly.
NOTE:
To provide access for securing the faucet connections, temporarily position block spacers at the
corners between the shroud and the bath rim. Position the blocks to avoid damaging the alignment guides
located under the bath rim.
With help, carefully lift the bath into place over the shroud and onto the temporary blocks.
Secure all drain connections and fittings according to the drain instructions.
For a rim-mount faucet, install the faucet and trim according to the faucet and trim instructions.
Make sure there is adequate support under the bath rim to support the faucet. Refer to the
″
Prepare
the Rim-Mount Faucet (Optional)
″
section.
Route the bound cables through the hole in the bottom of the shroud.
Carefully remove the blocks and make sure that the cables do not get pinched under the bath rim.
Ensure that the bath rim engages the top of the shroud on all sides.
Install the drain flange and overflow cover according to the drain instructions.
Close the bath drain. Fill the bath to the overflow, and check for leaks.
If desired, apply a thin, continuous bead of clear or color-matched 100% silicone sealant to the seam
between the bath and the finished floor.
Temporary
Blocks
Alignment
Guides
1237790-2-D 12 Kohler Co.