For tile, wood, or other porous materials, apply
waterproof sealant around the cutout area of the
countertop surface. Follow all manufacturer's
instructions and warnings. Allow the sealant to dry
before proceeding.
Use a 50/50 mixture of isopropyl alcohol and water to
clean the countertop surface around the cutout area.
Wipe dry with a clean cloth.
: Install the adhesive sealant when the
temperature is at least 10
. The preferred temperature
range to apply the adhesive sealant is 21
to 38
.
Loosely apply the adhesive sealant around the entire
countertop cutout so it is alongside the cutout hole.
Adjust the placement of the sealant before removing
the backing material. Cut off any excess seal material.
Carefully remove the adhesive seal backing material.
NOTE
Fig.#4
Adhesive
Sealant
Drill the faucet holes.
Install the faucet to the countertop according to the
manufacturer's instructions.
Install the drain to the lavatory according to the
installation instructions included with the drain. Apply a
sufficient amount of clear silicone sealant when you
install the drain.
-3-
CAUTION: Risk of personal injury or product
damage.
Large lavatories are very heavy. Get
help lifting the lavatory into place.
Note the location of the "Kohler" logo. The lavatory
should be installed so the logo is visible after
installation.
Carefully position the lavatory in the cutout, and press
down firmly.
Fig.#5
"Kohler" Logo
Connect the faucet supply lines.
Connect the drain assembly.
Open the faucet valves, and check for leakage.
Clean up with a non-abrasive cleaner.
Nut
Gasket
Nut
Gasket
Fig.#6
1007250-K01-A
