Installation and Maintenance Instructions
Part# STCFS
SMART TOILET CONTROL
WITH
FlushSense
®
FlushSense®
Control:
Consists of a controller, panel switch and 7’ of
cable, designed to automatically start a flushing
cycle if
a hand is within 2” from switch.
Flush timing of initial fill , discharge and final
fill are factory programmed. Optional multi
-
function panel is required to re-program
1
THE FOLLOWING ARE CAUTIONARY STATEMENTS THAT MUST BE READ AND
FOLLOWED DURING BOTH INSTALLATION AND OPERATION.
WARNING:
Raritan Engineering Company, Inc. Recommends that a qualified person or electrician install
this product. Equipment damage, injury to personnel or death could result from improper instal-
lation. Raritan Engineering Company, Inc. accepts no responsibility or liability for damage to
equipment, injury or death to personnel that may result from improper installation or operation
of this product.
WARNING: HAZARD OF SHOCK OR FIRE
Always use recommended fuse, circuit breaker and wire size.
Motors used with this product are “Ignition Protected”. They are not however, explosion-
proof as defined in 46CFR 110.15-65(e), Subchapter J-Electrical Engineering.
DO NOT
run continuously for more than 30 seconds.
Raritan’s FlushSense®
control is designed to automatically activate a flush cycle without touching
the control. Simply waving your hand within 2” of the sensor will begin a sequential flush cycle that
offers guests a simple and sanitary solution to flushing the toilet.
L492 0412vkm
