A.
·
·
A. Summary Of Key Requirements
Observe all local plumbing codes.
Install the unit to a level subfloor.
·
·
B. Product Inspection
Uncrate and inspect bath for damage. All Kohler s
baths have been manufactured with sophisticated
craftsmanship. However, please inspect for any
possible damage that may have occurred in transit.
Leave all materials in the crate during construction to
prevent damage.
Damage occurred during transit shall not be
covered by warranty.
’
NOTE:
B.
PRODUCT REQUIREMENTS
B. Factory-Assembled Features
Factory installed components include pump and air
switch transmitter. No installation is needed.
The whirlpool pump and piping are factory assembled.
Do not relocate the whirlpool pump, or make
other modifications to the whirlpool system, as this
could adversely affect the performance and safe
operation of the whirlpool. Kohler
. shall not be liable
under its warranty or otherwise for personal injury or
damage caused by any such unauthorized modification.
WARNING: Unauthorized modification may cause
unsafe operation and poor performance of the
whirlpool.
Co
B.
-2-
C. Electrical Connection
1. Pump
The installation must have a 30mA Earth Leakage
Circuit Breaker. The GFCI protects against Line-to-
Ground shock hazard. Use a 220-240V, 10A
(minimum), 50Hz dedicated service for the whirlpool.
C.
1.
30mA
GFCI
220-240
/50
10
1073414-T01-B
