1014299-2-
B
7
Kohler Co.
Supply Tube
Supply Tube
Spout
Aerator
4. Supply Tube and Supply Stop Connections
-
Install the lavatory using the lavatory manufacturer’s instructions.
-
Connect the supply tubes to the handle bodies and supply stops. (Left is
hot - right is cold).
-
Tighten all connections.
5. Installation Checkout
-
Connect the tailpiece and P-trap.
-
Ensure that all connections are tight.
-
Remove aerator by turning it counterclockwise.
-
Open the drain.
-
Turn on main water supply and check for leaks. Repair as needed.
-
Open both hot and cold valves and run water through the spout for
about a minute to remove debris. Check for leaks. Turn valves off.
-
Remove any debris from aerator and reinstall.
