1014299-2-
B
3
Kohler Co.
Nut
Apply
Plumbers
Putty
Metal
Washer
Escutcheon
Apply Plumbers
Putty
Handle
Body
Cross-
Handle
1. Spout Installation
-
Apply a bead of plumbers putty or other sealant to the underside of the
spout according to the putty manufacturer’s instructions.
-
Fit the spout through the top of the lavatory.
-
Install the metal washer and nut. Position the washer so the second hole
lines up with the drain lift rod hole. Securely wrench tighten the nut.
-
Remove any excess putty or sealant.
2. Handle Body Installation
-
Apply a bead of plumbers putty or other sealant to the underside of the
escutcheons according to the putty manufacturer’s instructions.
-
Insert the handle bodies into the mounting holes from the top of the
lavatory. Make sure the body marked “COLD” is installed in the
right-hand hole (as viewed from the front of the lavatory).
