Kohler K-12105, Руководство по установке

Страница: 12 / 44

Troubleshooting Procedures (cont.)
Symptoms Probable Causes Recommended Action
B. Control does not work. B. Replace control.
10. Pump operates but variable
speed feature does not work.
A. Motor/pump does not work. A. Replace motor/pump.
B. Control does not work. B. Replace control.
11.
Bath water cools while pump
is operating.
A.
Water temperature above 104°
F (40° C).
A.
Allow bath water to cool.
B.
Heater is turned off on user
keypad.
B.
Turn heater on.
C. Wiring from heater to control is
loose, disconnected or
damaged.
C. Check wiring for proper
connections.
D. Heater does not work. D. Replace heater.
E. Control does not work. E. Replace control.
12. Noisy operation. A. Pump banding straps have not
been cut.
A. Cut pump banding straps with
tin snips.
B. Dry or dislodged jet O-ring
(squeal).
B. Remove jet, replace and
lubricate O-ring, and reinstall
jet.
13. Remote control (if equipped)
does not work.
A. Batteries improperly installed
or dead.
A. Replace batteries.
B. Antenna on wiring harness is
damaged.
B. Replace wiring harness.
C. Remote control not
programmed correctly.
C. See homeowners guide or
service manual.
D. Remote control does not work. D. Replace remote control.
E. Control does not work. E. Replace control.
1023351-2-C 12 Kohler Co.