Kohler GLS-1, Руководство по установке

Страница: 9 / 32

TT-1686 3/16 9
15. Install the Decision-Maker r MPAC 1500 controller
assembly (GM85884-1) onto the conversion kit
mounting plate using four nuts X-6210-2. See
Figure 14.
1
GM99332
1. Controller mounting studs and nuts X-6210-2(qty. 4)
Figure 14 Controller Assembly Installation
16. See Figure 15 for ground connections. Use green
grounding lead LK-1212-1515 to connect the
ground stud on the conversion panel to the ground
lug on the door. Using lock washer X-22-12,
connect the ground wires to the ground stud on the
door. Place the grounding wires between the
washer and the nut.
Note: This photo does not show the latest controller design.
See Figure 13.
Figure 15 Ground Lead Connections
17. With the surfaces clean and dry, affix conversion kit
decals GM77248 and GM77249 over the old
decals on the outside of the enclosure door, if
present. See Figure 16.
2
GM99332
1. Decal GM77248
2. Decal 77249 (if required)
1
Note: Position decals directly over existing decals, if present.
Figure 16 Decal Installation