Kohler GLS-1, Руководство по установке

Страница: 8 / 32

8 TT-1686 3/16
Note: Refer to Figure 11 during kit installation.
13. Install the conversion kit mounting plate
(GM77130). Use seven lock washers (X-22-7) and
seven nuts (X-6210-4) to install the mounting plate
as shown in Figure 11. Install three flat washers
(X-25-122) with three nuts (X-6210-2) as shown.
14. Install the switch cover plate (GM77247) on the
outside of the enclosure door. Use one washer
X-25-122 and nine nuts X-6210-4 to install the
cover plate as shown in Figure 11 and Figure 12.
1
GM99332
1. Switch cover plate mounting hardware
Figure 12
Switch Cover Plate GM77247
Note: The illustrations in the following steps may not
show the latest controller design. See Figure 13
for the updated current sensing kit terminal block,
harness connection, and programmed-transition
interface board connection.
1. Current sensing terminal block with insulation and harness
(optional)
2. Programmed-transition interface board connection
(programmed- and closed-transition models only)
3. Contactor harness
4. Controller user interface
1
2 3
zab32174
4
Figure 13 Decision-Maker r MPAC Controller
Updated Features