Kohler Focal 701263, Руководство по установке

Страница: 4 / 16

4
97444-2-
AA
(-)
2
INSTALL IN-LINE JAMB/IN-LINE PANEL AND LOCATE BOTTOM TRACK
A. Place in-line jamb against wall or knee wall. Use a level to plumb jamb and mark hole locations.
B. Drill 3/16
″
diameter hole(s) and insert anchor(s). Secure the in-line jamb to wall or knee wall with No. 8-18 x 2
″
panhead screw(s). Slide the in-line panel into the installed in-line jamb.
C. Place the bottom track on the sub-track near the in-line panel. Fit an in-line jamb over the opposite side of the in-line
panel and down over the bottom track. Adjust the in-line panel and drill 1/8
″
diameter holes through the in-line
jambs and in-line panel side frames. Secure the in-line panel to the installed in-line jamb with No. 8-18 x 3/8
″
panhead screws. Do not secure the opposite in-line jamb now.
D. Mark the bottom track location on the sub-track and remove the bottom track along with the in-line jamb.
No. 8-18 x 2
Panhead
Screw
Anchor
In-Line Jamb
(Front Side)
In-Line Panel
In-Line Jamb
(Front Side)
Bottom
Track
Ledge
Sub-Track
3
INSTALL BOTTOM TRACK AND IN-LINE PANEL JAMB
A. Apply a bead of caulk on the underside of bottom track as shown and install at location marked on the sub-track.
B. Fit the in-line panel jamb over the in-line panel and down over the bottom track. Align the holes in the in-line jamb
with the in-line panel side frame holes and secure with No. 8-18 x 3/8
″
panhead screws.
Bottom Track
Caulk Here
No. 8-18 x 3/8
Panhead Screw
In-Line Jamb
(Front Side)
In-Line
Panel