Kohler Focal 701263, Руководство по установке, Страница: 6 / 16

6
97444-2-
AA
(-)
6
INSTALL BRACKETS TO “L”
JAMB
A. At the top end of “L” jamb, position a
bracket against jamb and align the
holes in bracket with the holes in “L”
jamb. Secure with 2 No. 8-32 x 3/4
″
panhead screws and No. 8-32 nuts.
B. Add caulk to bracket and insert the
plug.
C. Repeat procedure with the other
bracket at the bottom end of the “L”
jamb.
NOTE: Plug is not needed for
bottom bracket.
No. 8-32 x 3/4
Panhead Screw
Bracket
Add caulk in
this area and
insert plug
Plug
No.
8-32
Nut
“L” Jamb
(Front Side)
7
INSTALL“L” JAMB TO IN-LINE
PANEL JAMB
A. Insert a pin through the hole of the
bottom bracket with head of pin toward
bottom track. Place a washer down
over the pin as shown.
B. Holding the pin in place, position the “L”
jamb down over the bottom track and
fit the legs of the “L” jamb over the
in-line panel jamb.
C. Drill 1/8
″
diameter holes through the
leg of the “L” jamb and the in-line panel
jamb.
D. Secure with No. 8-18 x 3/8
″
panhead
screws.
Washer
Bracket
Pin
“L” Jamb
Bracket
Pin
Washer
No. 8-18 x 3/8
Panhead Screw
Bracket
“L” Jamb
(Front Side)
In-Line Panel
Side Frame
In-Line
Panel
In-Line Panel Jamb
(Front Side)