background image

   

                                                                          

1230979-2A-B            

                                                                                                                                        2   

  

   

                                                                          

1230979-2A-B            

                                                                                                                                        3  

  

INSTALLATION CHECKOUT

CLEANING INSTRUCTIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft 

cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely 

affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings. 

INSTALLATION

How To Install The Faucet

Slide the washer(2) into the groove of the body. Put the hoses into the 

mounting hole of the sink. Let the bottom of the body against the deck.

From underside of the sink, place the bracket(3) and nut(4) onto the 

mounting stud(1). Position the faucet so that mounting stud is toward the 

back and the two hoses is symmetrical. Tighten the nut to secure faucet 

to sink.

Attach the hoses to water supplies. When facing the front of the faucet, 

the left hose is hot water, the right is cold water.

Put the fiber washer(6) into the connector(7) and thread it to the shank 

(5). Lock the hose connector(8). Do not over tighten it.

Put the weight(9) onto the hose. Adjust the weight. The distance from the 

faucet base to the weight will be 600~650mm. Tighten the screws to fix 

up the weight.

Ensure that all coupling nuts are tight. Ensure that the lever handle is in 

the off position. Turn on the main water supply and drain, and check for 

leaks. Repair as needed.

Remove the hand spray(11), filter washer(10) and aerator(12). Run hot 

and cold water about one minute to remove any debris. Remove any 

debris from the filter washer and the aerator. Shut off the faucet. Reinstall 

the filter washer, aerator and hand spray.

How To Use Spray

If you want to use the hand spray by hand, take the hand spray and pull 

out the hose.

Press the button A as shown for the water flow.

NOTE: 

Please pull it gently and do not draw out the spray hose too long, 

or you may damage the hose, connector and lossen the lead weight.

A

10

11

12

1
2

3

4

5

6
7

8

9

600~650mm

"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953

Отзывы: