3
1
Remove the existing toilet: Turn off the water supply and flush the toilet,
then sponge out all remaining water from the cistern. Disconnect the supply
hose from the shut-off valve and remove the old pan and cistern.
CAUTION: Risk of hazardous gases. Temporarily stuff a rag in the closet
flange. Ensure this is removed before installing the new toilet.
Identify the type of toilet installation:
A) Side Entry with Bottom Inlet or B) Top Rear Entry with Side Inlet Valve.
For Side Entry toilets, the bottom inlet valve is supplied with the cistern.
Bottom
Inlet
Valve
Bottom
Inlet
Side
Inlet
Valve
2
For Side Entry/Bottom Inlet installations, check the shut-off valve position.
Left-hand
valve position
Right-hand
valve position
Shut-off
valve
Shut-off
valve
Side entry hole
For Top Rear Entry installations, skip to Pan Installation on page 6.
For Side Entry/Bottom Inlet installations, proceed with instructions, below.
B) Top Rear Entry
cistern configuration
Cistern
Inlet Hose
Top Rear
Entry
Bung
Side entry hole
NOTE:
For shut-off valves positioned on the right-hand side,
a longer water supply hose may be required (not supplied).
WARNING:
Ensure that no part of the cistern inlet hose is submerged in water.
Captive
Nut
(in pan)
Captive
Nut
(in pan)
A) Bottom inlet
cistern configuration
ENGLEFIELD
4
INSTALLATION INSTRUCTIONS
Back-to-Wall Toilet Suite
PREPARING TO INSTALL
EVORA
TM
