background image

SynergiiOne Back Inlet Toilet Suite

SY04137 & SY04147

Installation Guide

www.streamlineproducts.com.au  |  Ph: 1300 735 352

This SynergiiOne Back Inlet Toilet Suite is designed for right hand 

inlet installation. A 1/2” male thread will need to be plumbed in at 

the location shown. 
The standard set-out for a S-Trap is 80-200mm. 
All distances are from final floor or finished wall.

The installer will need to supply the right angle stop tap.  

1

80-200

185

210

800

Optional elbow for set out 160-220mm (JT34)

Dimensions are in millimeters and are subject to manufacturing variations. Streamline reserves 

the right to vary specifications at any time without notice. Information provided within this 

installation sheet is correct at the date of printing.  

Version: 1.0 - September 2020

This product installation must comply to AS/NZS 3500.

70

Please leave the instructions with the owner.

WM-022487

AS1172

ARCISAN

Front view

Содержание Arcisan SynergiiOne SY04137

Страница 1: ...loor or finished wall The installer will need to supply the right angle stop tap 1 80 200 185 210 800 Optional elbow for set out 160 220mm JT34 Dimensions are in millimeters and are subject to manufacturing variations Streamline reserves the right to vary specifications at any time without notice Information provided within this installation sheet is correct at the date of printing Version 1 0 Sep...

Страница 2: ...ut horizontal pipe to required length and fit seal Attach wall fixing kit to elbow push elbow into the pan collar and adjust to correct height Fix to wall and adjust to ensure the elbow is vertical 4 Attach pan bolts into holes as shown 6 Locate the pan in the final position Screw threads into floor mount brackets 55 2 57mm 5 Ensure pan bolts are positioned so the plastic cistern is flat against t...

Страница 3: ...ern cover Ensure the half and full flush is lined up correctly with the correct positions on the outlet valve Slide ceramic cistern cover over the plastic cistern ensuring that the grooves on cover and plastic cistern line up This will ensure the cover sits securely 9 3 11 12 7 Fit outlet seal to bottom of outlet mechanism Do not place outlet seal on pan and then sit cistern on top 8 Remove inlet ...

Страница 4: ...nd metal washers as far down the screw as possible then finger tighten 15 16 Once you have positioned the seat in the desired position open the lid and with an 8mm spanner tighten the posts until the seat is locked in place Push seat onto the posts and close lid Move the seat around until it is square with the pan Please leave the instructions with the owner ...

Отзывы: