Koganei ION WIPER DTY-WC-L, Руководство пользователя

Страница: 5 / 14

・Always connect to an outlet with grounding electrode in
order to prevent electrostatic charging of the whole unit
and to make use of full performance of the Ionizer.
・ When using an outlet without grounding electrode
unavoidably, always use F.G. screw (M3) located beside
the duct to connect for grounding. Check to ensure that
the lead wire for grounding is not damaged.
4-1. Precautions on Installation of the ION WIPER
・ Use the ION WIPER indoors. For installation of the unit, care should be taken to the
contamination by oil or water, high temperature and high humidity.
・Especially, avoid a place subject to dew condensation.
・Install the unit on a solid and flat surface such as a working bench. Avoid unstable places.
・Prevent the installed metal cap of the Ionizer from contacting its metal frame, etc.
4-2. Exhaust Duct
Take care with fan.
- 14 -
4. Installation, Wiring and Tubing
4-3. Power Supply
・Apply 100VAC (50/60Hz) for power supply of the unit.
4-4. Wiring for Grounding
φ76.3
Note: When used with defective grounding of the ION
WIPER, static charge elimination and dust removal
performance will degrade.
F.G.（M3）
4-5. Air Tubing
・Use urethane or nylon tube with outer diameter of φ8 for
air tubing to the ION WIPER.
・The ION WIPER is designed to remove dust accumulated
on the workpiece (charged object). Supply clean air that
passes through a dryer or filter.
Connection Port
for Air tubing
(φ8 quick fitting)
・ Outer diameter of the exhaust duct is φ76.3. Caution
should be exercised for exhaust resistance when
connecting such as exhaust hoses. (Recommended
nominal diameter of the exhaust hose: φ75)
DTY-WCM-□ has a blower fan inside the duct. Be
careful not to be injured by the fan or damage of the
fan.
4-6. Installation of Expanded Metal
・Install the expanded metal from the front side of the main
body as shown in the picture. Align cutout portion of the
expanded metal (one place for A4, two places for A3) with
the top of the
photoelectric switch.
Handle the expanded metal carefully as the cut section
is very sharp.
Expanded metal
Caution
Caution
Caution