12
Overview of Remote Control
General Description
1.
INPUT:
This button is used to switch among
different sources: DTV,ATV, AV,YPbPr,VGA, HDMI1,
HDMI2, HDMI3, HDMI4.
Select a source and press OK button to confirm.
2.
POWER:
Press this button to switch to standby
mode, and press it again to turn TV on.
3.
Digital buttons(0~9):
To select channel with
digital buttons.
4.
INFO:
This button is used to start the "Current
Service Banner" application that provides
information about the current service.
5.
RECALL:
Switch to the previous program.
6.
FREEZE
: Press this button to freeze the image.
7.
8.
SLEEP:
TV will be switched off automatically at
preset sleep time if you have set sleep timer. Use
your remote control to set the sleep timer.
Press SLEEP button on the remote control, then
press this button again to set sleep time: off, 10,
20,30, 60,90,120,180, 240 min. Press MENU
button to exit when you have set the sleep timer.
After you have set sleep timer, press SLEEP button
again, you will see the Remaining time.
Notes: The sleep timer you have set will be
cancelled when the TV turns off or if a power
failure occurs.
9.
CH.LIST:
Press it to show channel list on screen.
10.
FAV:
Press it to display favorite list.
11.
12.
GUIDE:
In DTV source, this button is used to
start the EPG application.
14.
DTV
: Switch to DTV mode.
16.
3D/2D
: Press this button to display the “3D setting”.
MENU:
Press this button to display main menu or
exit the menu. When you are in the submenu, you
can press it to return the main menu.
Arrow buttons:
Press these buttons to move
cursor up/down/left/right for menu.
OK/REC LIST:
Press this button to display a list
of recorded programs. In main menu and submenu,
it is a validation button.
13.
Exit:
Exit the menu.
15.
Note:It is suggested to watch 3D program under
the operation temperature above 10 C to
obtain the best 3D effect.
HOME
