Kogan KAALM8GSPYA, Руководство пользователя

Страница: 6 / 7

Charging the Battery:
You can charge the built-in rechargeable battery with the included mini-USB cable. To
charge the battery, the master switch must be in the “OFF” position. A red LED will light up
when the unit is on charging and will go out once the battery is fully charged. If the alarm
clock of battery become extremely hot while charging, please disconnect it immediately.
When the battery is low, the blue LED will keep flashing or the screen display will be unclear.
Please charge it immediately. If the battery dies, the current video or audio file will be
recorded to the microSD card automatically prior to power down.
Adjust DVR Time/Date:
The time and date of your alarm clock DVR can be configured by the following steps.
1 – Install the driver “SPCA1520_V1200_WHQL.exe” in the included CD.
2 – Turn off the camera and take out the microSD card, then connect the clock to the PC
via the mini USB cable. Once the drivers have been installed, you will be able to use the
clock in Webcam mode.
3 – Run “SyncTime.exe” then click “Synchronization”. Now the recordings will show the
same time as your PC.
Specifications:
Image Sensor 2.0 MegaPixel
Resolution 640x480
Video Format AVI
Frame number 30fps
Viewable angle 72
Motion Detection 6 meters distance (straight line)
Minimum illumination 1LUX
Battery capacity 2200MA
Continuous recording time Up to 12 hours
Remote operating distance
15m
Range for sound recording Approx 40m2
Power consumption 130MA / 3.7V
Storage temperature -20~80
℃
Operating temperature -10~60
℃
Operating humidity 15~85% RH
Type of memory card Micro SD card
Capacity of memory card 32GB maximum
Player software Windows Media player / KM player
USB Interface USB1.1/2.0
Operating system WIN 2000/ XP / Vista32 / 7
Recording Usage Approx 1GB/40 minutes
Charging time Approx 4 hours